Degree of protection of light fixtures against the penetration of solids and liquids.
IEC 529 - EN 60529 Standard.
(First digit – Solids / Second digit – Liquids)
IP55
5. Protected against dust penetration.
5. Protected against jets of water.
IP65
6. Hermetically protected against dust.
5. Protected against jets of water.
IP66
6. Hermetically protected against dust.
6. Protected against sea swells and similar.
Degree of protection against mechanical impacts provided by the enclosure.
In accordance with EN 50102.
IK08 (0.5 J), IK09 (1 J), IK10 (2 J).
CLASS I.
Functional insulation in all its parts and ground connection.
CLASS II.
Double reinforced insulation to avoid voltage in exposed metal parts.
Product certificates
All our products comply with applicable European Directives and Standards, authorizing free circulation within the European Economic Area (EEA). We also comply with the Electromagnetic Compatibility (EMC) Directive and the Low Voltage Directive. We certify with ENAC-accredited external laboratories.
We comply with the Restriction of Hazardous Substances (RoHS) Directive for electrical and electronic components. We also comply with the Waste Directive (RAEE/WEEE) for respectful waste management.
Illumination in outdoor private spaces
An outdoor wall-mounted light for structuring a facade and drawing visual attention toward areas of interest, entrances, transit areas or vertical walls. The Tumbler outdoor wall-mounted light embodies the meaning of private outdoor spaces, with efficient and comfortable lighting technology.
- Anodised injection-moulded aluminium EN-AC-47100 luminaire with powder-coated finish, suitable for C5 zones.
- Interior ABS-PC plastic reflector.
- Tempered optical glass diffuser.
- Ceiling rose made from die-cast EN-AC-46100 aluminum with powder-coated finish, suitable for C5 zones.
- A2 stainless steel hardware and metal cable gland.
White
The colours shown are purely indicative.
Other colours are available upon request.
Check finishes for marine environments.
2700K 80CRI
Integrated LED (COB)
16W Output
230V 50Hz Input
Wall lamp
Architectural
Wide Flood
All our elements can be remotely controlled, both individually and in groups, by means of the most standardised control systems, in order to considerably reduce energy consumption.
TRIAC/Phase-cut
The TRIAC regulation system allows adjusting the product’s light intensity by controlling the power delivered through phase-cut.
ON/OFF
Simple on and off.
- The lamp comes packaged with the installation and assembly instructions and screws.
- The system is compatible with an electrical installation built into the facade.
- Fixing wall plugs not included.
- We recommend fixing it to a uniform, continuous surface.
- Includes pressure compensation valve.
- Clean using pH-neutral, alcohol-free, and non-abrasive cleaning products.
CE
RoHs
IP66
IK08
Clase I
Wall-mounted light: 9,5
*Approximate weight without packaging (kg)
