Degree of protection of light fixtures against the penetration of solids and liquids.
IEC 529 - EN 60529 Standard.
(First digit – Solids / Second digit – Liquids)
IP55
5. Protected against dust penetration.
5. Protected against jets of water.
IP65
6. Hermetically protected against dust.
5. Protected against jets of water.
IP66
6. Hermetically protected against dust.
6. Protected against sea swells and similar.
Degree of protection against mechanical impacts provided by the enclosure.
In accordance with EN 50102.
IK08 (0.5 J), IK09 (1 J), IK10 (2 J).
CLASS I.
Functional insulation in all its parts and ground connection.
CLASS II.
Double reinforced insulation to avoid voltage in exposed metal parts.
Product certificates
All our products comply with applicable European Directives and Standards, authorizing free circulation within the European Economic Area (EEA). We also comply with the Electromagnetic Compatibility (EMC) Directive and the Low Voltage Directive. We certify with ENAC-accredited external laboratories.
We comply with the Restriction of Hazardous Substances (RoHS) Directive for electrical and electronic components. We also comply with the Waste Directive (RAEE/WEEE) for respectful waste management.
Resistant and robust
A pathway light that is resistant to weathering and intensive use, ideal for signaling, delineating pathway spaces or containing traffic flows.
- Body and cap made from cast iron, painted finish with C3 anti-corrosive protection.
- Diffuser made from high-strength polyethylene, with matte interior finish.
Black
The colours shown are purely indicative.
Other colours are available upon request.
Check finishes for marine environments.
System power (W)
High efficiency optical unit
- 4 LEDs 6W
Operating current (mA)
- 350
Colour temperature (K)
- 3000 CRI min80
Service life
TM21 L70 (10k) > 60,000 h.
Pathway
- The element is finished off with two types of anchoring: recessed and surface.
- Recessed anchoring using three steel bolts with anti-rust protection, inserted into 15 cm holes below pavement level, which were created in advance, with a groove for electrical connection, filled with epoxy resin, quick cement or something similar.
- Surface anchoring with three stainless steel screws.
- Installation and assembly instructions, screws included.
- Clean using pH-neutral, alcohol-free, and non-abrasive cleaning products.
CE
RoHs
IP66
IK08
Clase I
Pathway light: 45
*Approximate weight without packaging (kg)
